Watchguard AP420 - About Your Hardware

2 WatchGuard AP420
Hardware Specifications
About Your Hardware
Hardware Specifications
AP420
Radio Type and
Frequency Band
2.4GHz, 802.11b/g/n. Max data rate: 800 Mbps
5GHz, 802.11a/n/ac. Max data rate: 1.733 Gbps
Third radio for dedicated RF and security scanning
Antenna 10 integrated omnidirectional antennas
 4 antennas: 2.4GHz radio
 4 antennas: 5GHz radio
 2 antennas: Third scanning radio
Ethernet interface 1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1)
802.3at PoE+ / 802.3af PoE, PoE input voltage: 48V
1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2) for link
aggregation or a wired extension of an SSID with NAT
enabled.
1 x RJ45 serial console
RS232 Serial
Bits per second: 115200
Data Bits: 8, Stop Bits: 1
Parity: None, Flow Control: None
USB Port 1 USB 2.0 port (Not in use)
Power Interface Power over Ethernet: 802.3at (PoE+) / 802.3af (PoE)
DC jack (6.3mm connector): 12V DC input, 2.0A
Power
Consumption
Max: 19 W
Min: 11W
Average: 16W
Dimensions 220mm × 220mm × 57mm
Weight 2.86 lb. (1.3 kg)