Hardware Guide 3
Hardware Specifications
Environmental Requirements
To safely install your WatchGuard AP, we recommend that you:
Install the device indoors.
Make sure the device has adequate clearance for air flow and cooling.
Connect it to a surge-protected power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature 0°C to 40°C (32°F to 104°F)
Operating relative humidity 0% to 95% non-condensing
Non-operating temperature -25°C to 75°C (-13°F to 167°F)
Non-operating relative humidity 0% to 95% non-condensing
To Next Page
