WatchNet MPIX-21BIMR - General Introduction; Overview; Features; Specifications

1
1 General Introduction
1.1 Overview
This series network camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly without
any auxiliary device.
This series network camera product uses standard H.264 video compression technology and G.711a
audio compression technology, which maximally guarantee the audio and video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
It supports real-time monitor and listening at the same time. It supports analog video output and dual-
way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
network camera is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
 Different user rights for each group, one user belongs to one group.
 The user right shall not exceed the group right.
Storage
Function
 Support central server backup function in accordance with your configuration and
setup in alarm or schedule setting
 Support record via Web and the recorded file are storage in the client-end PC.
 Support network storage function such as FTP.
Alarm
Function
 Real-time respond to external on-off alarm input, and video detect as user pre-
defined activation setup and generate corresponding message in screen and
audio prompt(allow user to pre-record audio file)
 Real-time video detect: motion detect, camera masking.
Network
Monitor
 Network camera supports one-channel audio/video data transmit to network
terminal and then decode. Delay is within 270ms (network bandwidth support
needed)
 Max supports 20 connections.
 Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
 Support web access.
Network
Management
 Realize network camera configuration and management via Ethernet.
 Support device management via web or client-end.
Power
 External power adapter DC12V/AC 24V. You can select according to your actual
environments. Please note system cannot support these two types of power
supplying at the same time.
Assistant
Function
 Log function
 Support system resource information and running status real-time display.
 Day/Night mode auto switch.
 Built-in IR light. Support IR night vision.
 Support picture parameter setup such as electronic shutter and gain setup.