Need help?Do you have a question about the Water Tech Reionator Pro Ultra RXU13 and is the answer not in the manual?
Guidelines for maintaining the system, including checking salt levels and using appropriate regenerant salt.
Addresses common service problems like display issues, power outages, and changes in water quality.
Ensuring compliance with state/local regulations for plumbing and electrical connections before installation.
Instructions for correctly installing the Reionator Pro® Ultra system into the cold water supply line.
Procedure for bypassing the system during water or plumbing related emergencies.
Recommendation to reduce cleaning product usage due to increased efficiency with conditioned water.
Mandatory monthly inspection of the brine tank to ensure proper system function.
Initiating manual regeneration when high water usage is anticipated to maintain performance.
Guidance on contacting the WaterTech Dealer for questions regarding system operation or water quality.
Prohibition against hanging or stacking items on the equipment to prevent imbalance or strain.
Warning against disconnecting or removing any part of the plumbing or electrical cord.
Restriction on reprogramming the system, except for time clock settings, due to factory programming.
Caution against overfilling the brine tank with salt, recommending a fill level 6 inches below the rim.
Warning to avoid exposing the system and plumbing to extreme temperatures (below 40°F or above 110°F).
Prohibition against using the system with microbiologically unsafe water without prior disinfection.
Illustrates the typical plumbing setup for connecting the Reionator Pro® Ultra system.
Guidelines for connecting the drain line, emphasizing the need for an air gap to prevent backflow.
Detailed steps for initiating the system's regeneration process, including flushing, conditioning, and sanitizing.
Instructions on how to set the current time on the Triton control valve display.
Procedure for entering installer screens and setting the water hardness level based on raw water analysis.
Guidance on setting the automatic regeneration time for the system via the control valve display.
Information on error messages displayed by the control valve and the recommended course of action.
Explanation of the four positions of the bypass valve: Normal Operation, Bypass, Diagnostic, and Shut Off.
Illustrations showing the normal, bypass, diagnostic, and shut-off modes of the bypass valve.
Specifies warranty applicability for USA/Canadian residential water supplies meeting EPA MCL standards.
Details the warranty coverage for the conditioner tank and brine tank, and internal mechanical components.
Outlines the warranty for the water treatment resin, including limitations on chlorine and iron/manganese content.
Covers the warranty for the control valve body and PC board, and internal mechanical components.
Lists exclusions from warranty coverage and limitations on Water Tech Industries' liability.
Instructions on how to obtain warranty service, including registration requirements and repair procedures.
General| Brand | Water Tech |
|---|---|
| Model | Reionator Pro Ultra RXU13 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
