Installation Guide - NiMH to Lithium
Need Help? Contact Customer Care at (732) 967-9888
Upgrading the Water Tech
TM
Volt FX-4Li Motor Box
4
STEP 7: Insert previously set aside screws into screw
openings at exhaust and tighten with screwdriver. Do NOT
overtighten the screws and cause damage to the threads.
Place cap on top of motor box and latch handle closed.
STEP 8: Finished unit. Press ON/OFF button to
make sure impeller rotates freely.
Rev.: 5102018
To Previous Page
Loading...
