Need help?Do you have a question about the WaterCare TotalCare Series and is the answer not in the manual?
General| Brand | WaterCare |
|---|---|
| Model | TotalCare Series |
| Category | Water Dispenser |
| Language | English |
Outlines duties for dealers, installers, and homeowners for unit setup.
Explains system displays and how to navigate them during operation.
Steps to initiate a double regeneration cycle for the water softener.
Describes the valve's normal water flow configuration.
Explains isolating the system from water pressure.
Details the position for system testing and service.
Explains how to turn off water supply to the unit.
Key precautions and warnings for installation and service.
Specifies necessary conditions like pressure and temperature.
Covers installation specifics for different water sources.
Guides on connecting water lines to the unit's control valve.
Proper grounding and electrical connections for the unit.
Instructions for connecting the drain line with air gap.
Proper connections for the brine tank and overflow line.
How to set the current time on the control unit.
Guides through setting hardness, regeneration, and alarms.
Configuring audible alarms and their timings.
Adjusting the display's backlight for visibility.
Steps to flush debris and air after installation.
Processes to condition media and sanitize the unit.
Overview of system status and information screens.
How to use the vacation mode to shut down the system.
Explains automatic and manual regeneration processes.
Procedures for power interruptions and battery changes.
Handling errors, maintaining the brine tank, and salt indicators.
Resolving problems related to the PC board and display indicators.
Troubleshooting regeneration timing and valve operation issues.
Solving issues with automatic regeneration and water quality.
Addressing issues with regenerant usage and water flow.
Troubleshooting problems with drawing regenerant and water draining.
Resolving errors related to motor movement and stalling.
Troubleshooting errors related to motor running too long or timing out.
Resolving motor stall issues and problems with foreign material.
Diagnosing and fixing specific error codes like motor state, leak, and memory.
Detailed steps for servicing the transfer cap assembly.
Guidance on reassembling parts and performing a soft reset.
Lists replacement parts for the front cover and drive mechanism.
Lists replacement components for the piston and in/out head.
Lists replacement parts for the twin transfer assembly.
Lists replacement parts for the optional chlorine generator.
Lists replacement parts for the bypass valve and brine elbow.
Details the specific service wrench tool.
Lists various injector assemblies by color and type.
Lists replacement parts for the water meter and plug.
Lists replacement parts for 3/4" and 1" drain line assemblies.
Lists replacement parts for the brine tank and safety float components.
Lists parts for connecting smaller tanks.
Lists parts for connecting larger tanks.
Lists common nuts, rings, and fittings used across assemblies.
Lists various PVC, brass, and sweat fittings for different connections.
Technical data for CSE-TW and CSP-TW series models.
Technical data for CSERC-TW and CSPRC-TW series models.
Details on regeneration cycle durations and salt consumption.
Technical data for TC1-TW series models.
Technical data for TC2-TW series models.
Details on regeneration cycle durations and water usage.
Overview of system operation and display toggles.
Instructions for resetting the clock after power loss.
How to perform manual regeneration and interpret error codes.
Instructions on how to operate the bypass valve.
Guide for initial setup and making adjustments to key settings.
To Next Page
