3 | 40
Safety Precautions
• Read and understand all the associated documentation before you operate
the equipment.
• Read and understand all the notices and safety precautions.
• Be aware that these instructions are only guidelines and are not meant to be
operating, or maintaining the equipment.
• Do not install the equipment if you are not familiar with the tools and skills
needed to safely perform the required procedures—proper installation is the
responsibility of the purchaser.
• Do not operate the equipment when safety guards are removed.
• Do not modify the equipment.
• Regularly check for leaks, worn, or deteriorated parts.
•
• Keep clear of moving
parts when the equipment
is operating.
Rotating parts can cause
severe injury or death.
Moving Parts
Do not touch the surface
during operation––allow
it to cool after operating.
Hot surface can burn you.
Hot Surface
•
•
Do not operate if the water
temperature exceeds
160ºF (71ºC).
Hot liquid can scald you.
Hot Liquid
•
•
To Next Page
