Watersnake ASP T-18 User Manual

www.watersnake.com.au
3
PRE INSTALLATION CHECKLIST
• Familiarise yourself with the user manual and the various parts of your
Watersnake motor
• Select desired mounting location on boat
• 12 v deep cycle battery
(your Watersnake motor is not designed for use with car / truck / motorcycle
type batteries) – for more information about appropriate batteries for your
Watersnake motor, refer to page 8
• Check battery cable length in relation to location of your 12v deep cycle
battery. If extension to battery cable is required, refer to table on page 8
NOTE – if extending battery cable ensure that the circuit breaker remains
in place on the positive wire
PRE-USE CHECKLIST – CHECK BEFORE EACH USE
• Ensure that your Watersnake motor is securely attached to your boat
(refer to page 4 of manual)
• Fully charged 12v deep cycle battery (your Watersnake motor is
not designed to be used with a car / truck / motorcycle type battery)
• Check battery cable for any signs of damage or exposed wiring
• Check terminals for any signs of corrosion or debris
• Check fuse assembly / circuit breaker – clean if any signs of corrosion or
debris. Replace fuse if necessary. ( If your motor is equiped with one. )
ASP
THE BELOW INFORMATION IS FOR THE USA ONLY.

Watersnake ASP T-18 Specifications

General

Brand	Watersnake
Model	ASP T-18
Category	Engine
Language	English