Do you have a question about the Watersnake GEO-SPOT GPS 65LB and is the answer not in the manual?
Motor Type | Electric |
---|---|
Thrust | 65 lb |
Voltage | 12V |
GPS Functionality | Yes |
Speed Settings | Variable |
GPS Anchor | Yes |
Battery Indicator | Yes |
Control Type | Remote Control |
Discusses common problems affecting GPS signal and operation.
Details specifications for the 54-inch shaft models.
Details specifications for the 66-inch shaft model.
Details specifications for the 60-inch shaft model.
Guides users through essential checks before mounting the motor.
Instructions and tools required for attaching the motor to the boat.
Step-by-step guide for direct motor mounting without a quick release bracket.
Instructions for installing the motor using the optional nylon quick release bracket.
Instructions for installing the motor using the optional alloy quick release bracket.
Guidelines for connecting the motor to a suitable 12V deep cycle battery.
Specifies the required 12V deep cycle battery type and minimum capacity.
Recommends procedures for safely charging the deep cycle battery.
Explains voltage drop and wire gauge requirements for extended cables.
Step-by-step guide on correctly connecting the motor cables to the battery terminals.
Describes the functions, operation, and buttons of the remote control unit.
Explains the icons, information, and abbreviations shown on the remote control's screen.
Covers pre-use checks, initial power-up, and basic setup for the GPS motor.
Guides on calibrating steering and setting user preferences like boat size and units.
Explains how to operate the motor using basic manual controls.
Instructions on using the Anchor mode for maintaining position.
Details on using the Pilot mode for heading or course navigation.
Explains GPS speed, course mode, and how to use cruise control.
Instructions on recording tracks and using the Navigate mode.
Procedures for cleaning and care after first use and after each subsequent use.
Covers routine checks during the season and long-term storage procedures.
Solutions for problems related to motor power, speed, noise, and vibration.
Troubleshooting for steering, anchor mode, deployment, stowing, and remote control problems.
Guidance on interpreting error messages and resolving issues with the optional foot control.