Need help?Do you have a question about the Watersnake SLITHER SL and is the answer not in the manual?
General| Brand | Watersnake |
|---|---|
| Model | SLITHER SL |
| Category | Outboard Motor |
| Language | English |
Set motor depth by loosening the collar screw, adjusting shaft, and retightening the screw.
Ensure all switches are OFF and clear the propeller before connecting motor to battery.
Connect red cable to positive (+) and black cable to negative (-) terminals for optimal power.
Use an inline fuse to protect the motor circuit from shorts and overheating.
Troubleshooting steps for reduced or no power issues, including propeller obstructions and battery checks.
Troubleshooting steps for motor noise or vibration, checking propeller security and bent shafts.
Clean the motor thoroughly after each use, especially after saltwater fishing, using warm soapy water.
Dry the motor and lubricate friction points with appropriate grease after cleaning.
Recommended to use an Authorised Service Agent for motor servicing due to precision components.
Servicing yourself or unauthorized third parties voids warranty. Use good quality grease sparingly.
In-line fuse kits protect the motor from shorts and overheating. Waterproof and easy to install.
To Next Page