Watersnake VENOM SX - Page 3

www.watersnake.com.au
3
SPECIFICATION SUMMARY
MODEL SXW 44/36 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 44
SHAFT LENGTH (IN) 36
MIN AMP DRAW (A/H) 11
MAX AMP DRAW (A/H) 44
PROP 3 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 60 - 80 AMP HOUR **
MODEL SXW 54/36 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 54
SHAFT LENGTH (IN) 36
MIN AMP DRAW (A/H) 13
MAX AMP DRAW (A/H) 54
PROP 3 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 80 - 100 AMP HOUR **
MODEL SXW 65/42 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 65
SHAFT LENGTH (IN) 42
MIN AMP DRAW (A/H) 13
MAX AMP DRAW (A/H) 65
PROP 3 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 80 - 120 AMP HOUR **
** NOTE - this is to be used as a guide only. Check with your battery
supplier to confi rm required size of 12 volt deep cycle marine battery that
will be appropriate for your situation.
VENOM SX