Watersnake VENOM SX - Specification Summary

Watersnake
2
SPECIFICATION SUMMARY
MODEL SXW 34/26 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 34
SHAFT LENGTH (IN) 26
MIN AMP DRAW (A/H) 7.5
MAX AMP DRAW (A/H) 34
PROP 2 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 40 - 60 AMP HOUR **
MODEL SXW 54/26 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 54
SHAFT LENGTH (IN) 26
MIN AMP DRAW (A/H) 13
MAX AMP DRAW (A/H) 54
PROP 3 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 80 - 100 AMP HOUR **
MODEL SXW 34/30 (VENOM)
VOLTAGE (V) 12
MAX.THURST (LB) 34
SHAFT LENGTH (IN) 30
MIN AMP DRAW (A/H) 7.5
MAX AMP DRAW (A/H) 34
PROP 2 BLADE
MOUNTING ALLOY TRANSOM
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 40 - 60 AMP HOUR **
** NOTE - this is to be used as a guide only. Check with your battery
supplier to confi rm required size of 12 volt deep cycle marine battery that
will be appropriate for your situation.