Need help?Do you have a question about the Waterway BOOSTER PUMP and is the answer not in the manual?
General| Brand | Waterway |
|---|---|
| Model | BOOSTER PUMP |
| Category | Water Pump |
| Language | English |
Pump must be installed by a licensed electrician or qualified pool serviceman. Improper installation creates an electrical hazard.
Guidelines to protect the motor from heat, dirt, and moisture to prevent damage and voiding the warranty.
Details on service breaker, wiring, and recommended time clock or manual switch for pump operation.
Instructions for plumbing the booster pump with a dedicated return line, upstream of air inducing equipment and away from chlorinators.
Guidance on water flow, pipe diameter, hose connections, and mounting the pump securely.
Illustrations of preferred and alternative plumbing configurations for the booster pump.
Procedure to verify water flow to the booster pump after system plumbing is complete.
Instructions for winterizing the pump to prevent freeze damage, including draining and disconnecting lines.
Diagram of the booster pump with an itemized list of all parts for identification and replacement.
To Next Page
