To Next PageTo Next PageWhat does error E12 mean on my Waterway Power Defender 140?
If the Waterway Swimming Pool Pump displays the error code E 12 – UI Key Stuck, press the Start/Pause button to see if you can release it. If the fault continues to occur after verifying the wire connections, contact your pool professional or a qualified electrician for service.
What does error E13 mean on my Waterway Power Defender 140?
If the Waterway Swimming Pool Pump displays the error code E 13 – UI EE failure, power down the motor and press any Speed button to restart the pump. If the fault continues to occur after powering up the motor, contact your pool professional or a qualified electrician for service.
What does error E4 mean on my Waterway Power Defender 140 Swimming Pool Pump?
After the temperature in the power module drops below the threshold number, the Waterway Swimming Pool pump automatically restarts and clears the fault from the LCD display, if the error code E 4 – Hot Power Module is displayed.
General| Brand | Waterway |
|---|---|
| Model | Power Defender 140 |
| Category | Swimming Pool Pump |
| Language | English |
Details input voltage ranges, line current, and power factor for the motor.
Details protections against motor stall, phase loss, overcurrent, and overpower.
Covers low temperature, power module temperature, and under-voltage protections.
Instructions for programming up to seven custom timers with start times, durations, and speeds.
Methods for temporarily overriding programmed timer speeds and flow rates.
Initial steps for diagnosing common motor shaft and noise issues.
Covers issues like motor start failure, stalling, vibration, and general operation.
Details the terms, duration, and coverage of the manufacturer's limited warranty.
