Watlow 942 Series - Chapter 2; Output 1 Wiring

13
Install and Wire, Chapter 2 WATLOW Series 942 User's Manual
Output 1 Wiring
Figure 16 -
Process, 4 - 20mA,
Output 1 Wiring.
Process, 4 - 20mA, Output 1
Model # 942A - _
F _ _ - _ 000
Process Output
Proportional value determined by the control to balance the sensor input and set point. This
value will fall between 4 - 20mA depending on the thermal characteristics of the system.
Load impedance is 600
Ω maximum.
Figure 17 -
Process, 0 - 20mA,
Output 1 Wiring.
Process, 0 - 20mA, Output 1
Model # 942A - _
G _ _ - _ 000
Process Output
Proportional value determined by the control to balance the sensor input and set point. This
value will fall between 0 - 20mA depending on the thermal characteristics of the system.
Load impedance is 600
Ω maximum.
Process, 0-20 mA, Non-Isolated
16
17
External
Load
+
-
I DC
+
-
Process, 4-20 mA, Non-Isolated
17
18
External
Load
-
+
I DC
-
+