11.2 Wiring the US NEMA module 20
11.3 Wiring the NEMA module 20
11.4 Earth screening of control cables on NEMAmodule 20
11.5 Ethernet M12 connector screen connection 22
12 Start-up check list 23
13 Control wiring 24
13.1 Upper D-connector 24
13.2 PROFIBUS 24
14 Control wiring 33
14.1 Pump external interface parameters 34
14.2 Features on the rear of the pump 35
14.3 IP31 Wiring connections 36
14.4 Sensor Wiring - IP31 36
14.5 IP66 Wiring - N Module 40
14.6 Input/output connectors - IP66 44
14.7 Network topology 46
15 Switching the pump on for the first time 47
15.1 Selecting the display language 47
15.2 First-time start-up defaults 49
16 Switching the pump on in subsequent power cycles 51
17 Mode menu 52
18 Manual 53
18.1 START 53
18.2 STOP 54
18.3 INCREASING AND DECREASING FLOW RATE 55
18.4 MAX FUNCTION (Manual mode only) 56
19 Flow calibration 57
19.1 Setting the flow calibration 57
20 PROFIBUS mode 60
20.1 MODE menu 60
20.2 Manual mode operation when PROFIBUS is enabled 60
20.3 PROFIBUS mode 62
20.4 Assigning the PROFIBUS station address at the pump 64
2 m-630bpn-en-08
To Next Page