Need help?Do you have a question about the Watson-Marlow qdos30 and is the answer not in the manual?
Conditions for warranty validity, including service and connections.
Items and conditions excluded from the warranty coverage.
Instructions for safely disposing of packaging and inspecting components.
List of supplied parts, optional accessories, and storage recommendations.
Detailed technical data including flow range, power, and dimensions.
Electrical, safety, and EMC standards for AC and DC power supplies.
Physical dimensions of different qdos pump models.
Weight specifications for various qdos models and configurations.
Key advice for safe and effective pump installation and setup.
Best practices, prohibitions, pressure limits, and dry running behavior.
Guidance for connecting the pump to an AC power source.
Information on connecting to various DC power sources.
Details of input pin functions and wiring connections.
Details of output pin functions and wiring connections.
Procedures for relay module cover removal, refitting, and terminal wiring.
Instructions for wiring the terminal connectors on the relay module.
Diagrams and explanations of 24V relay module PCB connectors.
Diagrams and explanations of 110V relay module PCB connectors.
Guidelines for installing the pump on a PROFIBUS network.
Pinout details for PROFIBUS connections at the pump.
First-time power-up, language selection, and initial defaults.
Procedure for powering up the pump after initial setup.
How the remote pump operates via analog signal input.
Keypad functions for manual, PROFIBUS, and Universal modes.
Enabling PROFIBUS and setting the station address.
Troubleshooting communication issues and using the GSD file.
Information about the PROFIBUS GSD file for integration.
Setting user parameters via the GSD file for PROFIBUS.
Details on PROFIBUS data exchange, parameters, and diagnostics.
Information on device-specific diagnostic data.
Details on channel-specific diagnostic data.
Procedure to calibrate the 4-20mA input for Universal+ models.
Configuring contact mode and its operating parameters.
How the pump operates in contact mode.
Enabling and operating remote fluid recovery.
Monitoring fluid levels and setting alerts.
Configuring keypad lock, PIN protection, and auto restart.
Adjusting flow units, asset number, pump label, and language.
Adjusting speed limits, resetting counters, and configuring outputs.
Accessing help screens for information and support.
What to do when a leak is detected by the pump.
List and explanation of pump error codes and suggested actions.
How LED icons indicate pump status and errors remotely.
Instructions for connecting tubing to the pumphead.
Instructions for connecting tubing to the pumphead.
Codes and structure for ordering specific pump models.
List of available spare parts and accessories with part numbers.
Detailed performance specifications, conditions, and curves.
General| Pump Type | Peristaltic |
|---|---|
| Power Supply | 24V DC |
| Self-priming | Yes |
| Drive Type | Electric |
| Control | Manual or remote |
| Materials | Polypropylene |
| Operating Temperature Range | 0°C to 40°C |
To Next Page
