21.1 Fluid level monitor (Manual, PROFIBUS, Universal and
Universal+ only)
The fluid level monitor can be used to estimate the fluid level left in your supply tank.
When activated, the pump will display a bar on the home screen indicating the volume of
fluid in the tank. As the pump meters fluid, the volume of fluid in the supply reservoir will
reduce, the bar will track the reducing volume. The pump can be set up to output an alarm
when a defined level of fluid is reached. This will warn the operator to change the fluid
supply barrel or level to ensure that the pump does not run dry.
When the fluid level is estimated at zero the pump will stop.
On selection of this function from the main menu, it will ask you whether you wish to
ENABLE the fluid level bar.
m-qdos-en-02 85
To Next Page
Loading...
