7 Seven/Relay Workbench Assembly | INS-SWORKBENCH
Raceway Power Infeed
Connect the power infeed to an open terminal
on the nearest receptacle block located to
the floor (
A
) or wall junction (
B
). Secure with
clamp and #10-32x⅜” screw.
Spine Screen (optional)
A
Twist the knockouts to open the holes for the
Spine Screen supports.
B
Insert Spine Screen supports into Raceway
opening and secure with 5/16-18x¾” screws (x2).
Note — Important! The infeed
building service connection must
be performed by a qualified
electrician. For Wiring Schematic,
see page 11.
7.
8.
B
B
B
A
A
To Next Page
Loading...
