Watts Aerco INN 1060N - Exhaust Vent Connection Components

Innovation Water Heaters – Edge [i] Controller
Venting and Combustion Air Design Guide
TAG-0090_A • GF-5056 • 2/20/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 6 of 39
1.5. Exhaust Vent Connection Components
Figure 1 shows the components and part numbers for connecting the exhaust vents for the
Innovation-Edge models.
Exhaust Vent Adapters
INN 600N
INN 600N, INN 800N, INN 1060N, INN
1350N
4” (102 mm) (PVC) Kit # 24287
6” (152 mm) (PVC) Kit # 24286
INN 00N
INN 600N, INN 800N, INN 1060N, INN
1350N
6” to 4” (152 to 102 mm) DuraVent
®
PolyPro
Adapter P/N 39006-1
6” (152 mm) DuraVent
®
PolyPro Adapter P/N
39006-2
Figure 1: Exhaust Vent Connection Components