EasyManuals Logo

Watts Pure H2O Series User Manual

Watts Pure H2O Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Page 5
Check frequently over the next 24 hours to ensure no leaks
are present
System Start Up Annual Maintenance
Replacement lter: High Capacity Quick Turn
Carbon Filter (12 Months- PN# 88005232)
H2O-F45
To buy replacement part(s) please visit the retail store or their
website or contact Watts retail customer service at
(888) 321-0500
Step 1 - Turn on water supply at cold water angle stop.
Turn cold water faucet handle to the open position
to start the ow of water through the unit. Run 5
gallons of water through the unit in order to ush
out the normal black carbon nes (it will “sputter”
until the air is purged out) from the unit. A container
with a known volume can be lled to determine how
much water has ushed through the system. Initially,
the water may appear cloudy which is due to tiny air
bubbles and it will clear up shortly. Close the faucet
when nished.
Step 2 - Check for leaks. If you have any leaks, shut off the
water supply to your system, tighten any ttings then
turn the supply back on.
Step 1 - Turn off incoming water supply to the ltration unit.
Step 2 - Open the cold water faucet handle to relieve the
water pressure.
Step 3 - Remove the lter from the head by turning to the left,
then pulling downwards. Discard the old lter.
Step 4 - Remove plastic wrapping and cap from new lter.
Step 5 - To install new lter cartridge, with the lter label facing
approximately 45 degrees to the left, push the lter
into the lter head and twist it to the right until the
lter locks in and the label on lter is facing the front.
Step 6 - Follow start-up procedure.
Step 4
Step 5-2
Step 3
Step 5-1
NOTICE
Product Registration
To Register your product, please visit www.watts.com/pureh2o
and select “Register Now”. Watts is concerned for the safety of
your personal information. Watts collects personal information
when you register with Watts. This information is stored in our
data base and we do not rent, sell, or share personal information
with other people or nonafliated companies. We will send you
certain types of communications such as direct mail, email, or
by telephone relating to our products or products that you have
purchased only with your prior permission. We limit access to
your personal information to those employees who will directly
provide you with services or products in order to do their jobs.
See our privacy policy at - http://www.watts.com/privacy.asp
See Terms of Use at - http://www.watts.com/terms.asp
Tubing not shown in above pictures. Do not remove the tubing
while changing the filter
NOTICE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Watts Pure H2O Series and is the answer not in the manual?

Watts Pure H2O Series Specifications

General IconGeneral
Stages of Filtration5
TypeReverse Osmosis
Daily Production Capacity50 gallons
Installation TypeUnder Sink
Warranty1 year limited
Filter Life6-12 months

Related product manuals