Safety Recommendations
The TnP Prime has been designed to meet stringent safety requirements, however no device can
completely protect you from the consequences of incorrect use. The testing of electrical appliances
requires that extra care and caution is taken at all times to ensure personal safety.
The Manufacturer also advises that appliance testing should be conducted by a Competent Person
who is suitably trained (see P.5 AS/NZ 3760:2010 for the definition of Competent Person), as well as any
additional legislation or rulings in different states. If in doubt, the manufacturer suggests the user
contact their responsible authority.
For maximum safety, always ensure that the following advice is followed:
• The equipment being tested is in good condition and passes a visual check.
• All instructions are read, understood and followed.
• The power supply connections are always checked - if the N-E (middle) LED Indicator flashes red,
do not proceed before consulting the manual.
• Always use specified fuses and protection devices.
• Do not use leads that require repair or are damaged.
• If you are unsure, call a licensed Engineer/Electrician.
Kit Overview
TnP Prime Quick Start Guide Wavecom
Thermal Transfer
Printer
TnP Appliance
Tester
Storage
Compartment
Power Button
Port Panel
To Next Page
Loading...
