Need help?Do you have a question about the Wavecom TnP-500 and is the answer not in the manual?
General| Brand | Wavecom |
|---|---|
| Model | TnP-500 |
| Category | Test Equipment |
| Language | English |
Details about the tester's serial number and purchase records.
Visual representations of the TnP-500 unit and its components.
Defines the qualifications and responsibilities of a competent person for electrical testing.
Step-by-step instructions for powering on the TnP-500 appliance tester.
How to access and adjust test parameters and settings on the TnP-500.
Guide to connecting and using the TnP-500 with the WinPATS PC software.
Instructions for setting up the WinPATS Android app and connecting it to the tester.
Instructions for connecting the TnP-500 to a tablet using a USB cable.
Instructions for connecting the TnP-500 to a PC using a USB cable.
Procedure for adding and managing sites within the TnP-500's memory.
Procedure for adding and managing user profiles within the TnP-500.
Procedure for performing Class 1 earthed appliance tests, including earth bond and insulation.
How to use the TnP-500 as a digital wattmeter to measure appliance performance.
Important considerations before performing RCD tests, including upstream RCD tripping.
Explanation of Type 1 and Type 2 RCDs and their specifications.
Diagrams and instructions for setting up RCD tests for different appliance types.
How to adjust trip current and select RCD type for accurate testing.
Steps to modify the trip current level for RCD testing.
Procedure for selecting the correct RCD type (Type 1 or Type 2).
Step-by-step guide to performing RCD trip time tests.
Procedure for selecting the correct RCD type (Type 1 or Type 2) for ramp tests.
Step-by-step guide to performing RCD ramp tests.
Covers features, applications, and how-to guides for Meter Mode.
Definitions of Volts, Amperes, Watts, and Volt-Amps.
Important note on the intended use and limitations of Meter Mode.
Summarizes specifications for Mains Supply, Class 1, Class 2, Extension Leads, Leakage, RCD, and Power Measurement tests.
Details on Meter Mode operation, including load current and voltage.
Procedure and criteria for visually inspecting appliances before testing.
Explanation of Class 1 construction and protective earthing requirements.
Considerations for safely testing sensitive electronic equipment.
Procedure for conducting earth continuity (Earth Bond) tests.
Description of the controllable duration feature for Earth Bond tests.
Information on testing 3-phase appliances with optional adaptors.
Details about the types, colours, and order information for Wavecom tags.
Details about standard and UV ribbons for printing test tags.
Information on protective laminate overlays for test tags.
To Next Page
