38
TnP-500 User Manual Wavecom
Wavecom Tags & Ribbons
To support our test and print units we offer to you our range of electrical test tags that are made of the highest
grade polypropylene and polyester label materials. These materials are robust and resistant to tearing and
will cope with harsh Australian environments. It is recommended in extreme external conditions you use UV
resistant tags
Wavecom Printable Tags
The test tags/labels we offer come in the full range of colours, each tag comes with a clear white area where a
barcode can be printed onto, ensuring easy and accurate scanning. This ensures that your barcode scanner can
read the barcode.
All of the Wavecom tags are suitable for printing using every brand of thermal transfer printers available from
around the world. The adhesive used on our tags is most aggressive and comes highly recommended for use in
the electrical test and tag industry, there should be no butterflying once applied.
Order Information:
Standard Tags (500 Tags per Roll) Part no: WCM-TAG-(W, R, BL, G, O, Y, BR) - eg. WCM-TAG-W
UV Tags (400 Tags per Roll) Part no: WCM-UV-TAG-(W, R, BL, G, O, Y, BR) eg. WCM-UV-TAG-W
Colour Options: (W) White, (R) Red, (BL) Blue, (G) Green, (O) Orange, (Y) Yellow, (BR) Burgundy
Wavecom Printing Ribbon
In support of the Wavecom Tags we offer two grades of ribbons for printing electrical test tags. Our standard
ribbon (WCM-Ribbon) is recommended for locations where the printed tag is not exposed to harsh outdoor
conditions, such as offices and factories.
Our UV Ribbon (WCM-UV-Ribbon) is recommended for harsher environments like mines or where the
equipment is being tested is exposed to the elements. To ensure the durability of print on your tag it is
essential that the right ribbon is used on the appropriate label material.
Order information:
Standard Ribbon Part no: WCM-RIBBON
UV Ribbon Part no: WCM-UV-RIBBON
Laminated Overlays
In locations where a tag is exposed to harsh chemicals or extreme environments a printed tag may need
additional protection to ensure it is readable when the appliance needs to be retested. In these instances,
clear film overlays can be applied over the top of an existing tag. These clear laminate overlays are made of
strong durable synthetic materials and come with an adhesive backing that ensures that when the overlay is
stuck down it stays stuck. This allows you to use your standard Wavecom tags in harsh environments where a
standard tag would not normally be suitable.
To use our laminated overlays, the clear laminate is placed over the printed tag before removing it from the
backing paper. The combined tag and overlay is then removed from the backing paper and applied to the
appliance as normal.
Order information:
Clear Laminated Overlays (1000 per Roll) Part no: WCM-TAG-ALL-Clear-LAM
To Next Page
Loading...