13
TnP-500 User Manual Wavecom
Adding an Item
Type in the new barcode or press F3 quickly to auto generate a barcode number. Once
a barcode has been specified, items can be entered. If the screen displays “search
barcode” press Enter to switch to new barcode. There must be no numbers entered in
to switch between the two modes.
A selection of details can be entered for an item. Details include; location, description,
make, model, serial number, asset number, frequency of test and notes. Each heading
relates to an ‘F’; e.g. Location = F1, Description = F2 and Make = F3. Only 3 items are
displayed at one time. To scroll through the various details, press Enter.
Please make sure that Location, Description, and Test Frequency are correctly entered.
Once the details are entered, hold Enter for 2 seconds to move on to the visual check
screen.
Entering an items details is the same process as entering sites and users, please refer
to the Adding a Site/User steps above. Ensure that test frequency for the item is set in
accordance with the AS/NZS 3760:2022 Standard.
After the item, has been visually inspected, there is 1 of 3 options that can be selected;
Out of Service (F2), Fail (F3) and Pass (Enter). If Out of Service or Fail is selected the
result will be saved and the TnT will revert back to the barcode entry screen. If you
have a zebra printer a tag will be printed.
If the test is a visual check only then hold Enter for two seconds - See below for details.
If the item passes a visual inspection and pass is selected, testing can begin. Select the
correct test based on the appliance type.
More detailed information regarding the testing process can be found from page 13.
Once test has been completed the results are displayed.
To test the item again, press (F3). This will take you back to the main menu A screen.
From here you can choose a test class. You would use this for example if testing power
boards. To complete the test, press enter. This will take you back to the new barcode
screen. If you have a zebra printer, a barcode will be printed once (enter) is pressed.
To Next Page
Loading...
Need help?
General
