EasyManua.ls Logo

Waves SoundGrid - Specifications; Electrical; Dimensions; Installation Notes

Waves SoundGrid
6 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
CAUTION
RISK OF EXPLOSION IF THE BATTERY IS
REPLACED WITH AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO LOCAL REGULATIONS.
Specifications
Electrical
Power Brick:
110/220v, 60 Hz or 50 Hz, auto-switching
12V DC, 3A
Dimensions
Case:
Width: 19.5 cm / 7.6 in
Length (front to back): 20.5 cm / 8 in
Height: 3.8 cm / 1.5 in
Rubber Feet:
Height: 4 mm / 0.15 in
Weight: 1.06 Kg / 2.34 lbs.
1
1.06 Kg /
Ambient operating and storage conditions (temperature and relative humidity):
5-40°C, 85% RH
Norway ONLY: Product is permitted to be connected to
IT
power systems.
installation Notes:
If the server is installed in a rack, the rack manufacturer's safety instructions apply.
Approvals cover use in ambient air temperature of up to 40°C. Operation in higher
temperatures should be avoided. A 1U space should be left above and below the unit to
prevent heat transfer from adjacent equipment, if this generates heat above 40°C.
At least 75 mm (3 inches) should be allowed on the sides of the unit to allow ventilation.
At least 75 mm (3 inches) of free air should be available at both the front and the rear
sides of the rack to allow heat dissipation. Under no circumstances should the fan
(where fitted) or ventilation outlets be blocked or restricted. The server requires at least
25mm (1 inch) free air at the top of the unit to allow for ventilation.
t
All manuals and user guides at all-guides.com
all-guides.com

Related product manuals