Waveshare AlphaBot 2 User Manual

AlphaBot 2 User Manual
45
share awesome hardware
agent on
After entered the interface, input the following lines (you can input the command
help to check the command list after entered the interface).
agent on
default-agent
Following the scan on, you can see the physical address of the scanned Bluetooth
device, similar to XX:XX:XX:XX:XX:XX.
For Bluetooth pairing, use the following command (In here, XX:XX:XX:XX:XX:XX can
be replaced to your device address. For Android mobile phone, you can check the
Bluetooth address by Setting-> About phone-> Status information）
pair XX:XX:XX:XX:XX:XX

Waveshare AlphaBot 2 Specifications

General

Brand	Waveshare
Model	AlphaBot 2
Category	Robotics
Language	English