UART GPS NEO-6M User Manual Waveshare
www.waveshare.net
Click the button to connect to the NEO-6M GPS module.
u-center will show the information as below:
4. Install a plug-in, GoogleEarthPluginSetup.exe, for a better view. After finishing the
installation, select Google Earth under the View menu in the u-center.
Notes: There may be some differences between the reality and the result shown
by Google Earth, because of GPS static drift.
Appendix
How to modify the baud rate via u-center?
1. Select View->Messages View, and unfold UBX->CFG(Config)->PRT(Ports).
Then choose the baud rate you want to use in the Baudrate option, and click
the button Send to complete the modification. The figures below show the
steps in details.
To Next Page
Loading...
