Converting to Line Power
instruments are shipped from the factory with the
power transformer connected for
1
15-volt
line power,
unless ordered for 230-volt use. Converting a 115-volt
unit for 230-volt operation is a simple matter.
2.
Loosen two captive thumb screws on rear panel
and remove panel.
1.
Remove power cord.
3.
4.
The conversion switch is located on the chassis.
Use a thin-bladed screwdriver to move the 115-
230 switch to the 230 position.
Replace
1/4-ampere
fuse with a
1/8-ampere
fuse
of the same type.
To Next Page
Loading...
