SAFETY
This instrument
is
wired for earth grounding via the facility power wiring.
Do
no bypass
earth grounding with two wire extension cords, plug adapters, etc.
BEFORE
PLUGGING
IN
the instrument, comply with installation instructions.
MAINTENANCE may require power
on
with the instrument covers removed. This
should
be
done only by qualified personnel aware of the electrical hazards.
The
instrument power receptical
is
connected to the instrument safety earth terminal
with a green/yellow wire. Do not alter this connection. (Reference:
@or
& stamped
inside the rear panel near the safety earth terminal.)
WARNING notes call attention to possible injury or death hazards
in
subsequent
operations.
CAUTION
notes call attention to possible equipment damage
in
subsequent operations.
To Next Page
Loading...
