Wavetronix SmartSensor HD - Page 11

SmartSensor HD
11
e internal electronics of the RVSD shall utilize automation for surface mount assembly, and shall comply with the requirements
set forth in IPC-A-610C Class 2, Acceptability of Electronic Assemblies.
e RVSD shall undergo a rigorous sequence of operational testing to ensure product functionality and reliability. Testing shall
include the following:
• Functionality testing of all internal sub-assemblies
• Unit level burn-in testing of 48 hours’ duration or greater
• Final unit functionality testing prior to shipment
Test results and all associated data for the above testing shall be provided for each purchased RVSD by serial number, upon
request.
16.0 Support. e RVSD manufacturer shall provide both training and technical support services.
16.1 Training. e manufacturer-provided training shall be sucient to fully train installers and operators in the installa-
tion, conguration, and use of the RVSD to ensure accurate RVSD performance.
e manufacturer-provided training shall consist of comprehensive classroom labs and hands-on, in-the-eld, installation
and conguration training.
Classroom lab training shall involve presentations outlining and dening the RVSD, its functions, and the procedures for
proper operation. ese presentations shall be followed by hands-on labs in which trainees shall practice using the equip-
ment to calibrate and congure a virtual RVSD. To facilitate the classroom presentation and hands-on labs, the manufac-
turer-provided training shall include the following items:
• Knowledgeable trainer or trainers thoroughly familiar with the RVSD and its processes
• Presentation materials, including visual aids, printed manuals and other handout materials for each student
• Computer les, including video and raw data, to facilitate the virtual conguration of the RVSD
• Laptop computers or Windows CE handheld devices with the necessary software, and all necessary cables, connec-
tors, etc.
• All other equipment necessary to facilitate the virtual conguration of the RVSD
Field training shall provide each trainee with the hands-on opportunity to install and congure the RVSD at roadside.
Training shall be such that each trainee will mount and align the RVSD correctly.
16.2 Technical Assistance. Manufacturer-provided technical support shall be available according to contractual agree-
ments, and a technical representative shall be available to assist with the physical installation, alignment, and auto-congu-
ration of each supplied RVSD. Technical support shall be provided thereafter to assist with troubleshooting, maintenance,
or replacement of RVSDs should such services be required.
17.0 Documentation. RVSD documentation shall include a comprehensive user guide as well as an installer quick-reference
guide and a user quick-reference guide.
e RVSD manufacturer shall supply the following documentation and test results at the time of the bid submittal:
• Volume accuracy data, including performance analyses for:
• Free-owing trac
• Trac with a lane roughly 8 ft. (2.4 m) beyond a 4-ft. (1.2 m) concrete barrier
• 6-ft. (1.8-m) and 240-ft. (73.2-m) lateral oset (simultaneous)
• Speed accuracy test data for both per-vehicle and average speed
• Occupancy accuracy test data
• Vehicle classication test data
• Auto-conguration documentation
• FCC CFR 47 certication