Wavtech link2 - Specifications

Specifications
9
<10Hz to >100kHz
<5Hz to >100kHz
180Ω / >20KΩ
2-20Vrms / 4-40Vrms
Spk Input 40Vrms
Output Impedance
<50Ω
Max Output Voltage
>10Vrms
<0.01%
at 1V output >90dBA
at 4V output >102dBA
at 10V output >110dBA
Remote via REM IN >10.5V
DC-offset via Spk Input >1.3V
via Spk Input <100mV
via RCA Input <10mV
Turn-off Delay up to 60sec
>500mA
Within 3% of B+
<120mA
<1.4mA
10.5V-18V
<8.5V
1.1”x2.9”x2.5”
29x75x63mm
Product Dimensions
Chassis (not incl. terminals/jacks)
Power Off (B+)
Max Draw (w/o REM OUT)
Sleep Current
Power On (B+)
Max Flat (+0/-1dB)
Extended (+0/-3dB)
Spk Input
Spk Input (max-min gain)
Current Draw
Operating Voltage
Audio Signal
Turn-On Trigger
Spk Input
S/N
Remote Output
at 1% THD+N
Spk Input at 10V output
Current Capacity
Voltage
Input Impedance
Input Sensitivity
Max Input Voltage
THD+N
Frequency Response
Notes:
Ÿ Speaker level input sensitivity range is selectable per channel via internal jumpers (20V/40V)
Ÿ Built-in speaker level input loading is defeatable per channel via internal jumpers (LOAD)
Ÿ DC-offset and/or audio signal detect functions are defeatable via external jumpers (DC, AUD)
Ÿ All specifications are subject to change without notice
peak, <5sec cont.