Waylens Secure360 - Connect Power to the Secure360 Dock

7
2. Connect
power
to
the
Secure360
Dock
For
optimal performance,
please
ensure the power cord is
firmly
and
securely
fitted
into
the
USB
Type-C Power Connection.
It is recommended to disconnect power
from
the camera when not in use
for
an
extended period
of
time.
1.
Insert
the Type-C plug
of
the
Direct Wire
cable
or
USB
Type-C Power
cable
2.
Turn on the
vehicle accessory power or start the engine. The status
LED
will
illuminate
white
(and
turn
red then if a
SD
card is inserted).
3.
Open
the Secure360 app and
follow
the prompts
to
connect to the
Secure360 camera. View the live preview
of
the
camera to assist the
placement on the windshield.