EasyManua.ls Logo

Wayne-Dalton Torquemaster Plus User Manual

Wayne-Dalton Torquemaster Plus
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
©Copyright 2021
REV1_04/14/2021Part Number
Table Of Contents
365456
PLEASE DO NOT RETURN THIS PRODUCT
TO THE STORE
If you need assistance, please call 1-866-
569-3799 (press Option 1) and follow the
prompts to contact a customer service
representative. They will be happy to handle
any questions that you may have.
Pre-Installation 2
Important Safety Instructions 2
Removing an Existing Door and Preparing the Opening 2
Package Contents 3
Door Section Identification 4
Tools Required 4
Breakdown Of Parts 5
Door Installation Instructions 6
Counterbalance Installation Instructions 10
Maintenance 16
Cleaning Your Garage Door 16
Painting Your Garage Door 16
Maintaining The Finish On Your Garage Door 16
Operation And Maintenance 16
Warranty 17
Wayne Dalton, a division of Overhead Door Corporation
Models 9100 / 9605
T O R Q U E M A S T E R
®
P L U S
INSTALLATION INSTRUCTIONS AND OWNERS
MANUAL
RESIDENTIAL
STANDARD LIFT
To avoid possible injury, read and fully understand the enclosed
instructions carefully before installing and operating the garage door. Pay
close attention to all warnings and notes. After installation is complete,
fasten this manual near garage door for easy reference.
IMPORTANT NOTICES!
This Installation document is available at no charge from:
- Your local Wayne Dalton Sales Center, or
- Online at www.Wayne-Dalton.com, or
- By mailing to: Wayne Dalton, a division of Overhead Door Corporation,
P.O. Box 67, Mt. Hope, OH., 44660
Watch: https://www.youtube.com/
watch?v=IgE-hPXz3iU&feature=youtu.be
INSTALLATION VIDEO

Other manuals for Wayne-Dalton Torquemaster Plus

Question and Answer IconNeed help?

Do you have a question about the Wayne-Dalton Torquemaster Plus and is the answer not in the manual?

Wayne-Dalton Torquemaster Plus Specifications

General IconGeneral
BrandWayne-Dalton
ModelTorquemaster Plus
CategoryDoor Opening System
LanguageEnglish

Summary

Pre-Installation and Parts Overview

Important Safety Instructions

Essential safety guidelines for garage door installation and operation.

Counterbalance System Installation

Preparing Spring Tube Assembly

Preparing the spring tube assembly for installation and counterbalance.

Installing Cable Drum Assemblies

Mounting cable drum assemblies onto the winding shafts.

Attaching End Brackets to Flag Angles

Securing end brackets to flag angles and jambs.

Attaching Center Bracket to Wall

Fastening the center bracket assembly to the garage wall header.

Securing Door for Spring Winding

Securing the door in a closed position for safe spring winding.

Adjusting Counterbalance Lift Cables

Adjusting counterbalance lift cables for equal tension.

Winding the Springs

Properly winding the torsion springs to balance the door.

Final Installation and Balancing

Related product manuals