[Setting method]
1. Select a privacy masking from
the Privacy Masking List.
2. Click a parameter and modify it.
3. Click Modify, the privacy
masking is modified
successfully
Step 4 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
4.8 Configuring the Network Service
4.8.1 Setting 802.1x Parameters
Preparation
802.1x authentication must be configured on the access port, which controls to access
network resources for the connected user devices on the port.
Procedure
Step 1 Choose Configuration > Network Service > 802.1x.
The 802.1x page is displayed, as shown in Figure 4-26.
Figure 4-26 802.1x page
To Next Page
Loading...
Need help?
General
