Language: Choose OSD display language from English/Chinese/German/French/Spanish/Italian H-
Position: OSD horizontal position on the screen
V-Position: OSD vertical position on screen
Duration: OSD Menu timeout
Halftone: OSD Menu background opacity (allows viewing of the video behind the OSD menu).
Reset Defaults: Restore monitor to factory default settings
Version: Displays firmware version number (not adjustable).
Function / Geometry Menu
The HDMI, AV/CVBS and s-Video inputs share the
FUNCTION menu. The VGA menu is labeled
GEOMETRY.
Function Menu
Press the MENU button to bring the menu on
screen, and then up/ down buttons to move
along the menu selections to highlight the
FUNCTION menu. Press MENU again to move
between the left side main menu selector into
the window of menu choices and parameters.
Use the up & down buttons to move the yellow highlighted sub-menu selection within the sub-
menu. Pressing the right + & left - buttons will adjust the value of the highlighted item. Press the
MENU button to exit the sub-menu and return to the main menu selector.
To exit the menu system, press the SOURCE button twice.
Adjustments
DLC: Dynamic Light Control On/Off Limits the brightness/contrast ratio extremes in on screen
video.
Geometry Menu (VGA Only)
Press the MENU button to bring the menu on
screen, and then up/down buttons to move along
the menu selections to highlight the GEOMETRY
menu. Press MENU again to move between the
left side main menu selector into the window of
menu choices and parameters.
To Next Page
Loading...
Need help?
General
