Cautions
CAUTION TO SERVICE PERSONNEL
POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE
IN THIS PRODUCT. UNPLUG THIS PRODUCT FROM THE WALL OUTLET
BEFORE REMOVING THE BACK COVER AND SERVICING.
1. Never remove the back cover.
A. Only specially qualified personnel should remove the back cover.
2. Do not use in environments that may cause hazards.
A. To prevent electrical shock or a fire hazard, do not expose the monitor to rain or
moisture. This monitor is designed to be used in a residential or commercial environment.
Do not subject the monitor to excessive vibration or dust, or to corrosive gases.
3. Keep in a well-ventilated location.
A. Ventilation slots are provided on the cabinet to control the internal temperature of the
monitor. Do not cover these ventilation holes or place anything on the unit which might
block those slots.
4. Avoid excessive heat.
A. Avoid placing the monitor in direct sunshine or near a heating appliance.
5. To eliminate eye fatigue.
A. Do not use the monitor against a bright background or where sunlight and other light
sources will shine directly on the monitor.
6. Be careful of heavy objects.
A. Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.
FCC RF Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
To Next Page
Loading...
Need help?
General
