To exit the menu system, press the SOURCE button twice. Settings will remain as they appear on
screen.
Adjustments
Contrast: Adjusts the range of difference between light and dark areas of the picture.
Brightness: Adjusts the overall picture intensity
Hue: Increase or decrease the red/green/blue tint of the image.
Saturation: Increase or decrease the intensity of (mix of white with) colors in the image.
Sharpness: Change the balance between image detail (Resolution) and degree of transition
between areas of differing brightness (Acutance).
Color Temp: Adjust color reproduction: choose between normal, warm (more red) & cool (more
blue) to achieve the best visual result
Scale: Choose between SD 4:3 and HD 16:9 aspect ratio. If analog images appear „stretched‟ use
4:3 scaling.
Picture Overscan: Choose between legacy CRT-type cropping of picture edges (On) or display of
entire image without cropping (Off). Note: HDMI recognizes two types of signals: “Video” and “PC”;
for PC type signals Overscan is disabled.
Picture Mode: Choose for User/Vivid/Soft/Standard for most pleasing image based on ambient
light.
Picture Menu for VGA
Adjustments
Contrast: Adjusts the contrast between light and dark areas of the picture.
Brightness: Adjusts the overall picture shade and brightness.
To Next Page
Loading...
Need help?
General
