36
Factory Self-Calibration：
If the customer self-calibration will
not be helping to maintain the
machine to have satisfactory
balancing stability, we recommend
that you proceed Factory
Self-Calibration procedure. Below
you would find the detailed
instruction:
Press ―Home button‖ one time
,and it displays ―[ P ]‖, press
―DIS + button‖ one time ,
and you will see ―[ SET ]-[ UP ]‖
Press ―Home button‖ two
times , and it dispalys
[POS—XXX], pull the wheel by
hand( clock-wise or anti-clock-wise)
slowly.
When it displays [POS]—[110]
press ‗Fine button‖ one time ，
then continue to pull the wheel
slowly until it displays [POS]—[120]
Press ― Fine button‖ one time .
To Next Page
Loading...