14
D
GB
Program start of heating or ventilation
Press the button.
Press the button "Forward" or "Reverse" within 10 seconds until the
required time for starting heating operation is displayed.
If a different program number is required, the button must be pressed within
10 seconds.
Default settings:
Time 1: 6 hours
Time 2: 16 hours
Time 3: 22 hours
Note:
The default settings are overwritten when new values are entered. The preset
times are saved until changed. If you disconnect the clock from the electrical
system (for example by disconnecting the battery), the factory default settings
will be reset.
Deactivate preset time
Briefly press the button.
To Next Page
Loading...
Need help?
General
