15
D
GB
Select and activate preset time
Press the utton within 10 seconds until the program number with the
required preset time is displayed.
The selected timer setting will be activated automatically after
approx. 10 seconds without your having to press any other key.
To check the setting: The active mode (heating or ventilation )
and the program number will flash until the heater start time.
NOTE:
Read the safety instructions for operating the auxiliary heating system
(see operating manual for the auxiliary heating system) before you activate
the timer setting.
The auxiliary heating system is started at the activated timer setting regardless
of whether the vehicle is moving or at a standstill.
To Next Page
Loading...
Need help?
General
