Webasto 20 Series - Sliding Roof Operation; Open and Close Sliding Roof; Maintenance; Cleaning and Lubrication

20 Series Manual
4
1.3 Open and close the sliding roof
1. Rotate the release bar (C) to
unlock the tilting and sliding
mechanism
2. Pull the release bar to move the
sliding roof to the desired position
3. Rotate the release bar as far as
possible to lock the roof in the
new position
NOTE
Do not to open the sliding roof if there is moisture on the panel.
2 Maintenance
• Clean the sliding roof regularly.
• Wash the roof with lukewarm
water with a professional marine
cleaning product.
Then rinse with clean water.
• Apply a thin layer of grease (Isof-
lex
®
Topas L32) to the inside of
the rear rails (A) and guides (D) to
ensure smooth sliding.
• Never use:
– Alkaline products containing
sodium solutions;
– Acid products like muriatic or
those containing phosphor;
– Steel wool, abrasives or
sandpaper;
– Cleaning products for glass
containing alkaline, which can
corrode aluminium.
Fig. 2
123
Fig. 3
grease
(A)
grease
grease
(D)