40 Series
19
6. RESETTING
Different switch:
In case another switch is used to operate the roof, it
must be with potential-free and normally-open
contacts.
Connect the wiring to the switch as follows:
- Black and red => close roof
- Black and brown => open roof
When necessary, the marine sliding roof can be
operated manually.
The driving shaft of the motor can be turned with the
emergency key (F) to open or close the roof.
Important:
Do not attempt to function the roof electrically during
manual override operation.
If the roof is operated manually with the emergency
key (F), the control system must be reset.
Reset procedure:
Note:
Before beginning the reset procedure, ensure
there is a minimum of 20 A available..
- Press and hold the “close” button to close the
roof as far forward as possible.
- Release the “close” button.
- Within 1 second press and hold the “close”
button.
- While continuing to hold the “close” button;
after 10 seconds the glass panel moves with small
steps until it’s completely closed and the motor
produces a loud “click” sound.
- Now, release the “close” button.
The system has been reset.
To Next Page