4 Installation instructions CC8 roof-top air-conditioning system
402
4.4 Vehicle-specific parts not contained in installation kit and to be procured by the
customer
– Compressor (can be supplied by Webasto)
– Fastening elements/bracket for installing the compressor, or the universal compressor bracket from Webasto
– V-belt of appropriate size to match V-belt pulley dimensions
WARNING
When selecting a compressor be sure to choose one that has a built-in high-pressure
relief valve as a safety feature. All the compressors supplied by Webasto have a relief
valve of this type. The relief valve opening pressure must be as specified in the
technical data for the compressor (see 3.3).
4.5 Installation kits – air ducting system
4.5.1 Installation kit, air ducting system
The installation kit for the air ducting system contains the following components:
– 1 air distribution panel
– 1 sealing strip, 15 x 15 mm
– 1 identification plate "COMPACT COOLER"
– 1 air duct end piece
– 1 central air duct
– 1 frame end
– 2 frame segments
– 2 frame connectors
– 6 oval head screws M6 x 16
– 6 washers B6.4 (DIN 9021)
– 6 nuts M6 (DIN 985)
– 12 plastic expanding rivets
– 9 self-tapping screws 4.2 x 32 (DIN 7981)
– 1 expanded rubber strip, 15 x 4 mm
4.5.2 Extension kit, air ducting system
An extension kit is available to suit the desired length of the air ducting system. 1, 2 or 3 extension kits may be installed.
One extension kit for the air ducting system contains the following components:
– 1 central air duct
– 2 frame segments
– 1 frame connector
– 4 oval head screws M6 x 16
– 4 washers B6.4 (DIN 9021)
– 4 nuts M6 (DIN 985)
– 5 plastic expanding rivets
– 1 expanded rubber strip, 15 x 4 mm
4.5.3 Installation kit, air distribution panel (without air ducting system)
– 1 air distribution panel
– 1 sealing strip, 15 x 15
– 4 air nozzles
– 3 closing panels, 44 x 22
– 1 cap, 12.7 x 3.2
– 10 self-tapping screws 4.2 x 32 (DIN 7981)
– 1 identification plate "COMPACT COOLER"
To Next Page
Loading...
Need help?
General
