ENGINE OIL
1. Remove the oil filler cap with built in dipstick.
2. Fill the engine with 4-stroke SAE30 or 10W/30 air cooled lawnmower engine oil. DO NOT USE automotive
or marine oil. The use of a funnel will aid the filling. The engine capacity: See Briggs & Stratton Instruction
Manual.
3. Do not over fill!
4. After one minute, we recommend the dipstick on the oil filler cap is wiped with a clean cloth and dipped
(without screwing into the filler neck) to ensure the oil level remains between the minimum and
maximum marks on the dipstick.
5. Replace and tighten the oil filler cap with built in dipstick.
AMBIENT TEMPERATURES
The specification of oil required may change depending on the outdoot temperatures you are operating the
machine in. Refer to the Briggs & Stratton operators manual for further information.
To Next Page
Loading...
