TROUBLE SHOOTING
Switch off the trimmer and disconnect the battery before inspecting, cleaning or working on
the thread.
Slow running, noisy or hot
blades.
Dry, corroded blades.
Lubricate blades with rust
preventative solution or light
Blades or blade support
bent.
Straighten blade or blade support.
To be actioned by an approved
Bent or damaged teeth.
Straighten teeth. To be actioned
by an approved service dealer.
Unit will not start.
Battery not installed
properly.
Check battery installation.
Battery not charged.
Check battery charging
requirements.
Safety Lever not fully
operated.
Check that safety button is fully
pushed in prior to moving trigger.
Battery won’t charge.
Battery not inserted into
charger.
Insert battery into charger until
green LED appears. Charge up to 4
hours if battery totally drained.
Charger not plugged in.
Plug charger into a working outlet.
Refer to “Important Charging
Check current at outlet by plugging
in a lamp or other appliance.
Surrounding air temperature
too hot or too cold
Move charger and tool to an area
which has a temperature of above
40
o
F (4.5°C) or below 105
o
F
If you can’t fix the fault yourself, contact your retailer. Please be aware that any improper
repairs will also invalidate the warranty and additional costs may be incurred.
To Next Page
Loading...
