Weber 500 Series - Page 9

Two plastic buttons
(actual size)
Two 1/4-20 wing nuts
(actual size)
Eleven 1/4 inch nylon washers
Two hair pin cotters
Two wheel hubcaps
1/4-20 keps nut
Two phillips screws/washers
Check contents of hardware packs
Two burner control knobs
Two tool holders
Eight tubing plugs
(two are spares)
Two hinge pins
(hardware size: 1/4 x 1 1/2 inch clevis pin)
(actual size)
1/4-20 x 2 inch bolt
(actual size)
Two 1/4-20 x 1 3/4 inch bolts
(actual size)
Six 1/4-20 x 1/2 inch bolts
(actual size)
9