16 CF 3 L
Maintenance overview
The regulations of the engine manufacturer must be complied with in addition to
the above maintenance overview!
Work must be carried out using regulation tools and the operating and maintenance
manual must be complied with for all work.
All maintenance work: Select a collection vessel that is large enough to prevent oil from
spilling onto the ground. Dispose of waste oil in an environmentally friendly manner (re-
gulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an
environmentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon
contact with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
Maintenance interval
Maintenance point Maintenance activity
After the rst 25
operating hours
Engine - Change engine oil
-
Re-tighten all accessible
threaded connections
Every 8 operating hours/
daily
Air lter -
Clean air lter insert,
check for damage,
replace if necessary
Every 150 operating
hours/every 6 months
Engine - Change engine oil
Every 150 operating
hours/every year
Vibrator - Change oil
Engine - Adjust valve play
To Next Page
Loading...
