CF 3 L 17
Change engine oil lter
1
Completely drain the engine oil as previously described.
Remove the cover cap (1).
Replace oil lter (1) with a new element.
After replacing the lter element seal the lter enclosure with
the cover cap.
Change engine oil
1
Remove the oil drain screw (2) and drain oil.
After emptying completely, put in the locking screw (1). Fill
with oil in accordance with specications.
When working in the area of the engine compartment
there is danger of burn injury!
1
1
1
Maintenance work
Only drain engine oil when at operating temperature.
Danger of scalding due to hot oil.
If lubricating oils and fuel come into contact with skin, they
can cause skin cancer. Upon contact with the skin, clean
affected skin with suitable cleaning agent without delay.
2
Remove the oil dip stick (1).
To Next Page
Loading...
