Weber iGrill Mini User Manual

5
Battery Replacement
To replace your iGrill Mini battery, follow these steps:
• Separate the iGrill Mini from its base by rmly holding the base with
one hand and gently pulling the iGrill Mini top upwards with the
other hand.
• On the underside of the iGrill Mini, remove the battery door by
twisting it counter-clockwise.
• Replace the battery with a CR2032 coin cell battery, available at
local drugstores in the specialty battery section.
• Ensure the battery is in place and replace the battery door.
Powering On & Off
To turn on the iGrill Mini, follow these steps:
• Press the power button located at the center of the faceplate once,
quickly.
• The Smart LED will blink blue while waiting for pairing.
To turn off the iGrill Mini, follow these steps:
• Press and hold down the power button located in the center of the
faceplate for several seconds.
• The Smart LED will illuminate solid white and will then turn off.
Auto Shut-Off:
• The iGrill Mini will stay powered on for ve minutes before
automatically turning off if there is no probe installed and if it is not
paired to a smart device.
• The iGrill Mini will stay powered on for eight hours before
automatically turning off if not paired to a smart device and if the
probe is installed.
• The iGrill Mini will stay powered on until the battery is depleted if it
is paired with a smart device, even if there is no probe connected.

Weber iGrill Mini Specifications

General

Type	Digital
Bluetooth	Yes
Display type	LED
Product color	Black, Grey, Red
Bluetooth version	4.0
Necessary application	Weber iGrill
Temperature range (T-T)	-50 - 380 °C
Temperature measurement units	F, °C
Number of sensors supported (max)	1
Battery life	150 h
Battery type	CR2032

Weight and Dimensions

Depth	50.8 mm
Width	40.6 mm
Height	38.1 mm
Package depth	188 mm
Package width	99.1 mm
Package height	66 mm